About 2,210,000 results
Open links in new tab
  1. MDIO on GPIOs - NXP Community

    Jan 22, 2025 · MDIO on GPIOs In some cases, due to the limited resources allocated by imx pins, gpio has to be used as mdio/mdc. This article is a simple guide on how to use MDIO on …

  2. Solved: C9120AXI-E stuck in u-boot - Cisco Community

    Mar 13, 2025 · Hi guys, I’ve got this AP given from a friend and I’d like to configure it into my house, but it’s got no firmware. I looked up info on internet and, in order to configure it in …

  3. [LS1046A] mdio-tools on ubuntu OS - NXP Community

    Aug 20, 2024 · Hi NXP Team, I can't use https://github.com/wkz/mdio-tools in LSDK20.04 on LS1046A。 I have tried versions 1.1 to 1.3, and the result is the same. Can you help me ...

  4. IMX6ULL 同一路MDIO总线使用两个 JL1011 phy芯片有问题 - NXP …

    Aug 5, 2024 · 现象:设备树只开启一个网口节点是单独使用正常的,但是同时开启两个的话,phy id可以读到,但是两个网口都不能用.这两个phy是同一路MDIO总线,phy地址一个0一个1,MDIO 总线 …

  5. Cisco 9115 catalyst AP, MDIO Error: MDIO got failure status on phy 6

    Sep 7, 2020 · Hi We have a Cisco 3504 controller with 2 catalyst 11ax 9115 AP's in the setup When I updated cisco 3504 controller to 8.10.122.0 software version, only one AP is coming …

  6. uboot 获取mdio interface register部分寄存器 - NXP Community

    Jan 3, 2021 · uboot 如何获取mdio interface register部分寄存器, uboot 版本:U-Boot 2016.03 (Jan 29 2019 - 12:10:24 +0800)

  7. S32G399A - MDIO configuration in the Device Tree - NXP …

    Sep 24, 2024 · It uses as PHY handle the pfe_mdio_b_phy4 declared above. What concerns me are the comments. According to the User Guide we have this configuration as default: In this …

  8. PHY_Read is always returning 0xFFFF (MCU: MPC5775B, PHY: …

    Apr 23, 2025 · I could find that the reset signal is deasserted before the read activity on MDIO. I had checked the ECR register and confirmed that the ENET reset is also asserted and …

  9. LS1046 External MDIO max Frequency - NXP Community

    Dec 5, 2024 · Hi I would like a confirmation of the LS1046 external MDIO max frequency. Some document seem to reference a max frequency to 2.5MHz. (That seem like a typo) Others …

  10. Solved: [Yocto] [mickledore-6.1.55] [iMX8MN] Marvell ... - NXP …

    Dec 9, 2024 · Hi @Zhiming_Liu, Thanks for your support but the link you shared was what I'd tested before and MDIO bitbang is about using generic GPIOs as MDC/MDIO with the …